NEC Server R320A E4 User Manual

SCG300-10-001  
NEC Express5800/ft series  
System Configuration Guide  
Model R320a-E4/M4 (VMware)  
August 2010  
IT Network Global Solutions Division  
 
NEC Express5800/R320a-E4/M4  
System Configuration Guide  
Quad-Core Intel Xeon Processor supported  
4U Rackmount form factor  
VMware vSphere4 supported  
Specification Overview  
Model  
Express5800/R320a-E4  
Express5800/R320a-M4  
Redundancy  
Redundant  
Product Number  
N8800-149F  
Intel® Xeon® Processor  
E5504  
N8800-150F  
Intel® Xeon® Processor  
X5570  
CPU*1  
CPU  
Clock Speed  
2GHz  
2.93GHz  
No. of CPU (Standard/Max)  
L3 Cache  
1 / 2  
4MB  
8MB  
Core (C)/ Thread (T) (1CPU)  
4C/4T  
4C/8T  
Intel®5500 + GeminiEngine(FPGA)  
Redundant  
Redundant  
Chipset  
Memory*1  
 
Standard  
Minimum  
Memory less  
4GB  
(2GBDIMM ×1×2)  
96GB  
Maximum  
(8GBDIMM ×3×4)  
DDR3 SDRAM DIMM, Registered  
Memory type  
Operating frequency (Max)  
Error detection/correction  
800MHz  
1066MHz  
ECC, x4 SDDC  
-
Redundant  
Storage  
Drive bay  
Standard capacity  
Maximum capacity  
Hot plug  
2.5 inch HDD:  
SAS 2.4TB (8 ×300GB)*2  
Supported  
Interface and RAID  
Optical Disk Drive  
FDD  
SAS 3Gb/s: RAID1 (Standard)  
DVD-RAM drive*3  
External drive (option)  
2 × PCI Express 2.0  
Redundant  
      
(x4 lane, x8 socket)*4  
+
2 × PCI Express 1.0  
(x4 lane, x8 socket)*4  
      
         
      
Supported slot  
Expansion slot  
Graphics  
2 × PCI Express 1.0  
(x4 lane, x8 socket)*4  
         
         
Installation Type / Video RAM  
Color ,Resolution [dot]  
Integrated in Server Management Controller / 32MB  
16,777,216-color: 800x600, 1024x768  
65,536-color: 1280x1024  
1 x Analog RGB (Mini D-Sub15 pin, 1x Rear),  
4 x USB2.0 (1x Front, 3x Rear)  
External Interface  
Redundant  
Redundant  
2x 1000BASE-T LAN connector  
(1000BASE-T/100BASE-TX, RJ-45, 2× Rear)*4  
1 × Management LAN connector  
(100BASE-TX/10BASE-T, RJ-45, 1× Rear)*4  
External dimension (W x D x H)  
Weight (Min / Max)  
483×736×178mm (Not including protrusion)  
46kg/52kg  
AC100V-240V±10%, 50/60Hz±3Hz,  
2 x AC inlets  
Power Supply  
Power consumption (Max config, high load)  
Operation Condition (Temperature, Humidity)  
1400VA/1390W  
During operation: 10 to 35 / 20 to 80% (non condensation),  
When stored: -10 to 55 / 20 to 80% (non condensation)  
EXPRESSBUILDER ESMPRO/ServerManager(for Windows)),  
Included Accessories  
Supported OS  
User's Guide, User's Guide (Setup), Key  
VMware vSphere4 update1  
*1 Specifications are for each CPU/IO module. Actual number is double that is specified due to duplication  
*2 Logical Capacity  
*3 Writing function is not supported  
*4 The number of Slots in each CPU/IO module  
1st Edition August 10  
Page 1  
 
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
Outward  
450  
689  
736  
483  
178  
Tower conversion kit  
804  
220  
592  
327  
1st Edition August 10  
 
Page 2  
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
R320a-E4 Quick configuration sheet:  
CPU/IO module #0  
Onboard LAN  
Intel® Xeon®  
Processor  
E5504  
1000BASE-T x1  
1000BASE-T x1  
CPU 2  
CPU slot x 2  
Memory slot x 6  
Memory slot x 6  
Management LAN x 1  
#2  
#1  
Low-profile PCI-Express x4×2  
(x8 socket)  
2.5 inch HDD bay x 8  
PSU  
CPU/IO module #1  
Onboard LAN  
Intel® Xeon®  
Processor  
E5504  
1000BASE-T x1  
1000BASE-T x1  
CPU 2  
CPU slot x 2  
Memory slot x 6  
Memory slot x 6  
Management LAN x 1  
Low-profile PCI-Express x4 x2  
(x8 socket)  
#2  
#1  
2.5 inch HDD bay x 8  
PSU  
DVD-RAM  
1st Edition August 10  
Page 3  
 
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
R320a-M4 Quick configuration sheet:  
CPU/IO module #0  
Onboard LAN  
Intel® Xeon®  
Processor  
X5570  
1000BASE-T×1  
1000BASE-T×1  
CPU 2  
CPU slot x 2  
Management LAN x 1  
Memory slot x 6  
Memory slot x 6  
#4  
Full-height PCI-Express x4 x2  
(x8 socket) #3  
#2  
#1  
Low-profile PCI-Express x4 x2  
(x8 socket)  
2.5 inch HDD bay x 8  
PSU  
CPU/IO module #1  
Onboard LAN  
Intel® Xeon®  
Processor  
X5570  
1000BASE-T×1  
1000BASE-T×1  
CPU 2  
Management LAN x 1  
CPU slot x 2  
Memory slot x 6  
Memory slot x 6  
#4  
#3  
Full-height PCI-Express x4 x2  
(x8 socket)  
#2  
Low-profile PCI-Express x4x2  
(x8 socket)  
#1  
2.5 inch HDD bay x 8  
PSU  
DVD-RAM  
1st Edition August 10  
Page 4  
 
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
Notes for configuring FT server with VMware  
The following are needed to configure FT server VMware model.  
1. FT server main unit  
Select main unit and add optional CPU, Memory, HDD, PCI cards, etc.  
N8800-149F  
N8800-150F  
Express5800/R320a-E4  
Express5800/R320a-M4  
2. VMware license  
Select VMware license and optional license.  
VMware vSphere 4 Standard  
for 1 processor  
VMware vSphere 4 Essentials  
for 3 hosts  
VMware vSphere 4 Essentials  
Plus for 3 hosts  
VMware vSphere 4 Enterprise  
for 1 processor  
VMware vSphere 4 Enterprise  
Plus for 1 processor  
VMware vSphere 4 Advanced  
for 1 processor  
3. NEC Storage  
If needed, external storage can be connected for SAN boot and data disk.  
Procure as system requirement.  
D3-10  
D4-30  
D8-10/20/30  
E1-10  
4. UPS  
Procure as needed. (Local procurement)  
5. Guest OS license  
6. VMware vSphere Client  
A dedicated terminal is required for management of VMware vSphere 4 on the FT server. (Local procurement)  
7. NEC Storage management server  
Required when using NEC Storage.  
8. Backup server  
Dedicated server is recommended for backup.  
9. NEC ESMPRO Agent  
Download from ITPF portal site.  
1st Edition August 10  
Page 5  
 
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
FT server (main unit)  
Low-End rack mount  
N8800-149F NEC Express5800/R320a-E4 (4C/E5504-VM) Memory less, HDD less  
Intel ® Xeon® Processor E5504 (2.0GHz) x 1, 4MB 3rd cache, QPI speed 4.8GT/s  
Memory less (Mandatory option, Minimum 4GB, Max 96GB), HDD less (SAS HDD),  
DVD-RAM drive x1, 1000BASE-T 2ch as standard, PCI slot x2,  
EXPRESSBUILDER (NEC ESMPRO Manager included)  
Intel® Xeon®  
Processor E5504  
VMware  
vSphere4  
Update1 supported  
Mid-Range rack mount  
N8800-150F NEC Express5800/R320a-M4 (4C/X5570-VM) Memory less, HDD less  
Intel® Xeon® Processor X5570 (2.93GHz) x1, 8MB 3rd cache, QPI speed 6.4GT/s  
Memory less (Mandatory option, Minimum 4GB, Max 96GB), HDD less (SAS HDD),  
DVD-RAM drive x1, 1000BASE-T 2ch as standard, PCI slot x4,  
EXPRESSBUILDER (NEC ESMPRO Manager included)  
Intel® Xeon®  
Processor X5570  
VMware  
vSphere4  
update1 supported  
1st Edition August 10  
Page 6  
 
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
Processors  
[Note]  
- A pair of Quad-Core Xeon Processor is installed as standard.  
- CPU kit contains a pair of the processors to install both CPU/IO Module #0 and CPU/IO  
Module #1.  
For R320a-E4  
Socket #0: Standard Processor  
Processor  
Sockets  
Quad-Core Intel Xeon Processor E5504, 2 GHz, 4 MB L3 Cache, QPI 4.8GT/s as standard  
Socket #1: Additional Processor  
N8801-041  
CPU Kit(4C/E5504)  
Quad-Core Intel Xeon E5504, one pair  
2 logical  
sockets  
For R320a-M4  
Socket #0: Standard Processor  
Quad-Core Intel Xeon Processor X5570, 2.93 GHz, 8 MB L3 Cache, QPI 6.4GT/s as standard  
Socket #1: Additional Processor  
N8801-042  
CPU Kit(4C/X5570)  
Quad-Core Intel Xeon X5570, one pair  
Memory  
[Note]  
- 8GB or more memory is recommended.  
DIMM  
Sockets  
Product List  
DDR3-1066 Registered DIMM:  
N8802-041  
N8802-042  
N8802-043  
2GB Memory kit  
12GB Memory kit  
24GB Memory kit  
2X 2 GB DIMM (1x 2GB/module)  
6X 4 GB DIMM (3x 4GB/module)  
6X 8 GB DIMM (3x 8GB/module)  
12 logical  
sockets  
Memory configuration pattern  
DIMM Slot number  
Standard CPU side 2nd CPU side  
12 11 10 9  
CPU Total MEM  
1
2
2
2
2
2
4
4
8
8
8
2
3
2
2
2
2
2
4
4
8
8
8
4
5
6
8
7
4GB  
6GB  
2
2
2
2
4
4
8
8
8
8GB  
2
2
2
10GB  
2
2
12GB  
2
4
1
12GB  
24GB  
24GB  
36GB  
48GB  
4GB*1  
6GB  
4
4
4
8
4
8
4
8
2
2
2
2
2
2
2
2
4
4
4
8
8
8
2
2
2
2
2
2
2
2
2
4
4
4
8
8
8
2
8GB  
2
10GB  
12GB  
16GB  
2
2
2
2
2
2
2
4
4
4
8
8
8
2
2
2
2
4
4
4
8
8
8
2
2
2
2
4
4
4
8
8
8
2
2
2
2
4
4
4
8
8
8
2
2
2
2
2
2
20GB  
2
2
2
2
2
24GB  
2
2
24GB  
36GB  
48GB  
48GB  
72GB  
96GB  
2
4
2
4
2
4
2
4
2
4
2
4
4
8
4
8
4
8
4
8
4
8
4
8
*1: Memory interleave is valid except 2GB DIMM per CPU configuration.  
1st Edition August 10  
Page 7  
 
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
Hard disk drives  
[Note]  
- Up to 16 hard disk drives can be installed in the system.  
- Be sure to install by double of hard disk drives in order to have the RAID-1 configuration.  
Also both of the hard disk drives must have same capacity and rotational speed.  
2.5 INCH  
Disk bays  
Product List  
2.5 inch SAS:  
N8850-038  
N8850-039  
N8850-040  
N8850-041  
146.5GB 10k rpm SAS HDD 1X 146.5 GB HDD, w/ carrier  
16 hot-swap  
drive bays  
300GB 10k rpm SAS HDD  
73.2GB 15k rpm SAS HDD  
1X 300 GB HDD, w/ carrier  
1X 73.2 GB HDD, w/ carrier  
146.5GB 15k rpm SAS HDD 1X 146.5 GB HDD, w/ carrier  
Disk bay x 8  
Disk bay x 8  
CPU/IO module#0  
CPU/IO module #1  
#0  
#0  
System Disk  
#2  
#4  
#5  
#2  
#3  
#6  
#4  
#5  
#6  
#7  
System Disk  
#3  
#7  
#1  
#1  
Mirror  
The 73.2 GB HDD is recommended to install as system drive in order to  
reduce the time to resynchronize.  
* The mirroring function copies only changed files to resynchronize when replacing CPU/IO module, etc. in  
order to save time. However, all data in the HDD need to be copied when replacing HDD to new one.  
Server Management  
Onboard  
RAS chip  
R320a-E4/M4 have the enhanced remote management function "EXPRESSSCOPE Engine2" as standard.  
EXPRESSSCOPE Engine 2 (Standard)  
*There is Management LAN port (100/10BASE-TX) on each CPU/IO module.  
1st Edition August 10  
Page 8  
 
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
LCD Monitor  
[Note]  
- A monitor is required for maintenance.  
Monitor:  
15 INCH LCD  
D-sub 15 pin  
Interface  
Local procurement  
1 connector  
Input devices  
USB  
Interface  
Keyboard:  
N8870-002AF  
Mouse:  
104 keyboard  
1.8m cable length  
1.8m cable length  
3 connector  
N8870-010A  
Mouse  
Extension cable:  
K410-177(1A)  
USB cable 1.5m  
Floppy disk drive  
[Note]  
- The floppy drive is mandatory option due to maintenance.  
- The USB extension cables can be used up to 1.5 m length.  
- A tray to install the floppy disk drive is necessary to install in the rack mount system.  
Product List  
Floppy disk drive :  
USB  
Interface  
N8160-81  
External FDD  
2mode (720 KB/ 1.44 MB), 0.9m cable length  
Extension cable:  
K410-177(1A)  
3 connector  
USB cable 1.5m  
1st Edition August 10  
 
Page 9  
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
Optical disk drive  
[Note]  
-Writing function is not supported.  
-Optical disk drive is not accessible after installing ft Server Control Software.  
If you need to access the Optical disk drive, use the following command for temporary  
use.  
# /opt/ft/sbin/enable-usb-storage  
Using Optical disk drive is not recommended.  
USB  
Interface  
Optical disk drive:  
Slimline DVD-RAM drive included in the front panel as standard  
1 internal  
connector  
KVM switch  
[Note]  
- ft Server must be connected to the master KVM switch when cascade connection.  
- Be sure to apply PS/2 typed keyboard/Mouse to connect to KVM switch.  
- Updating the keyboard information is required after the installation has been complete,  
because the operating system recognizes the keyboard as a 101 keyboard.  
- Reconnect the cables or reset the KVM switch if the keyboard and mouse are out of  
function after CPU/IO module fail over.  
Sample configuration  
Master  
Switch unit connection cable  
set [K410-118(xx)]  
LCD Monitor  
<Local procurement>  
USB  
Interface  
Server Switch Unit  
(8Port/USB) [N8191-10F]  
104 Keyboard  
<Local procurement>  
Switch unit connection cable  
set [K410-119(xx)]  
Switch unit connection cable  
set [K410-119(1A)]  
D-sub 15pin  
Interface  
2 button w/ wheel mouse  
[N8170-15]  
Slave  
PS/2  
Server Switch Unit  
(8Port/USB) [N8191-10F]  
Cascade connection of KVM  
switches is allowed up to two  
tiers.  
Express5800/100 Series  
Switch unit connection cable  
set [K410-119(xx)]  
PS/2  
Express5800/100 Series  
Product List  
KVM switch:  
N8191-10F  
Server Switch Unit(8Server/USB)  
Switch unit connection cable set  
Switch unit connection cable set  
Switch unit connection cable set  
Swtich unit connection cable set  
Display/Keyboard extension cable  
1U or Desktop  
Cables:  
K410-118(1A)  
K410-118(03)  
K410-119(1A)  
K410-119(03)  
K410-104A(03)  
Keyboard/Mouse:  
KVM unit Server, USB, 1.8 m  
KVM unit Server, USB, 3 m  
KVM unit Server, PS/2, 1.8 m  
KVM unit Server, PS/2, 3 m  
KVM unit Keyboard/Mouse, PS/2, 3 m  
104Keyboard  
2 button w/ wheel mouse  
PS/2  
PS/2  
N8170-15  
1st Edition August 10  
Page 10  
 
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
17 inch LCD console unit  
USB  
Interface  
Switch Unit Connection Cable Set (1.8m/3m/5m)  
[K410-118(1A)] (1.8m)  
[K410-118(03)] (3m)  
[K410-118(05)] (5m)  
D-sub 15pin  
Interface  
Up to eight servers can be connected directly to the LCD console unit. Use optional Server  
Switch Units to connect more than eight servers.  
LCD Console Unit  
A 17-inch LCD, keyboard, mouse, and Server Switch Unit (x8)  
are integrated into the 1U LCD Console Unit.  
- 17-inch LCD Console Unit (1U/8port) [N8143-69F]  
Consists of the following components:  
17-inch LCD  
1280x1024 max. Full color  
Keyboard (no ten-key numeric keypad)  
Optical Mouse  
Server Switch Unit  
- Supports up to eight servers.  
- Cascade connection of KVM switches is allowed up to two tiers.  
Switch Unit Connection Cable Set (1.8m)  
[K410-119(1A)]  
Server Switch Unit  
- Server Switch Unit (8 ports) [N8191-10F]  
The 17-inch LCD Console Unit [N8143-69F] allows the connection of up to 64 servers  
by cascading eight Server Switch Units [N8191-10F].  
The 17-inch LCD Console Unit [N8143-69F] does not support other SSUs [N8191-09F/  
-09AF].  
1st Edition August 10  
Page 11  
 
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
Tower conversion kit  
[Note]  
- No tape device can be connected to R320a with Tower conversion kit without rack.  
N8843-003  
Tower conversion kit  
23 inch height pedestal rack with Front bezel for R320a  
327(W)804(D)592(H)mm, 26.5kg (including stabilizer)  
1st Edition August 10  
Page 12  
 
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
Network (LAN)  
[Note]  
- Be sure to connect four physical LAN interfaces to the network HUB. Each of two pairs  
of 1000BASE-T on the CPU/IO module is redundant configuration.  
- Be sure to install the network cards on the same PCI slot# of each CPU/IO module.  
Configuration  
1000BASE-T :  
RJ-45  
connector  
4 connector  
PCI-Ex Slot  
1000BASE-T Network  
2channel 1000BASE-T  
Controller [N8804-007]  
1 logical slot  
Product List  
1000BASE-T :  
N8804-007  
2-channel 1000BASE-T controller set  
a pair of controller  
1st Edition August 10  
Page 13  
 
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
VMware license  
[Note]  
- The R320a VMware models support VMware vSphere 4 Update 1.  
- VMware vSphere 4 license for Small Business  
UL1610-003-GL VMware vSphere 4 Essentials Bundle for 3 hosts (Max 2 CPUs per host and 6 cores per CPU) *1  
UL1610-004-GL  
VMware vSphere 4 Essentials Plus Bundle for 3 hosts (Max 2 CPUs per host and 6 cores per CPU) *2  
*1: ESX license for up to 3 Physical servers (Max 2 CPUs each) and VMware vCenter Server license for 3 ESX servers.  
*2: ESX license for up to 3 Physical servers (Max 2 CPUs each) and VMware vCenter Server license for 3 ESX servers.  
Also, Data Recovery and HA license for 6 CPUs included.  
- VMware vSphere 4 license for Medium and Large-sized Business  
UL1610-005-GL VMware vSphere 4 Standard for 1 processor (Max 6 cores per CPU) *3  
UL1610-006-GL  
UL1610-007-GL  
UL1610-008-GL  
VMware vSphere 4 Advanced for 1 processor (Max 12 cores per CPU) *3  
VMware vSphere 4 Enterprise for 1 processor (Max 6 cores per CPU) *3  
VMware vSphere 4 Enterprise Plus for 1 processor (Max 12 cores per CPU) *3  
*3: VMware vCenter Server license is not included. So, you need to order separately.  
- VMware vSphere 4 vCenter Server  
UL1610-009-GL VMware vCenter Server 4 Foundation for vSphere up to 3 hosts  
UL1610-00A-GL VMware vCenter Server 4 Standard for vSphere (Includes Orchestrator and Linked Mode)  
When you order VMware license, please also order below support product.  
UL1610-003-GL(S) 1 year support of VMware vSphere 4 Essentials Bundle for 3 hosts  
UL1610-004-GL(S) 1 year support of VMware vSphere 4 Essentials Plus Bundle for 3 hosts  
UL1610-005-GL(S) 1 year support of VMware vSphere 4 Standard for 1 processor (Max 6 cores per CPU)  
UL1610-006-GL(S) 1 year support of VMware vSphere 4 Advanced for 1 processor (Max 12 cores per CPU)  
UL1610-007-GL(S) 1 year support of VMware vSphere 4 Enterprise for 1 processor (Max 6 cores per CPU)  
UL1610-008-GL(S) 1 year support of VMware vSphere 4 Enterprise Plus for 1 processor (Max 12 cores per CPU)  
UL1610-009-GL(S) 1 year support of VMware vCenter Server 4 Foundation for vSphere up to 3 hosts  
UL1610-00A-GL(S) 1 year support of VMware vCenter Server 4 Standard for vSphere  
(Includes Orchestrator and Linked Mode)  
1st Edition August 10  
Page 14  
 
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
Storage  
Configuration  
Direct connection :  
Fibre Channel Controller kit  
[N8803-035]  
Fibre Channel Cable set  
[NF9320-SJxx]  
NEC Storage:  
-D3-10/D4-30/D8-10/  
D8-20/D8-30/E1-10  
PCI-Ex Slot  
1 logical slot  
Connection via Fiber Channel switch:  
Fibre Channel Controller kit  
(4Gb/Optical) [N8803-035]  
Fibre Channel Cable set  
[NF9320-SJxx]  
PCI-Ex Slot  
1 logical slot  
SFP module  
[NF9330-SF02]  
WB210E/WB230E FC switch  
[NF9330-SSxx]  
SFP module  
[NF9330-SF02]  
SFP module  
[NF9330-SF02]  
WB210E/WB230E FC switch  
[NF9330-SSxx]  
SFP module  
[NF9330-SF02]  
Fibre Channel Cable set  
[NF9320-SJxx]  
NEC Storage:  
-D3-10/D4-30/D8-10/  
D8-20/D8-30/E1-10  
Product List  
Fibre Channel controller:  
N8803-035  
Fibre Channel controller kit (4Gb/Optical)  
A pair of controller, PCI Express x8  
Fibre Channel swith/SFP module:  
NF9330-SS07E  
NF9330-SS08E  
NF9330-SF02  
Cables:  
WB210E Fibre Channel switch  
8 ports  
16 ports  
WB230E Fibre Channel switch  
SFP module  
NF9320-SJ01E  
NF9320-SJ02  
NF9320-SJ03  
NF9320-SJ04  
Fibre Channel Cable set  
Fibre Channel Cable set  
Fibre Channel Cable set  
Fibre Channel Cable set  
A pair of cable, 5 m  
A pair of cable, 10 m  
A pair of cable, 20 m  
A pair of cable, 50 m  
1st Edition August 10  
 
Page 15  
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
Supported PCI cards and installable slots  
R320a-E4  
CPU/IO module  
Low-Profile Full-Height  
Slot#1 Slot #2 Slot #3 Slot #4  
Product  
Code  
Notes  
1000BASE-T 2ch board kit  
Fibre Channel controller  
*1  
*1  
N8804-007  
N8803-035  
X
X
X
X
*1: Be sure to install a pair of controller on the same slot# of both of CPU/IO modules  
R320a-M4  
CPU/IO module  
Low-Profile Full-Height  
Slot#1 Slot #2 Slot #3 Slot #4  
Product  
Code  
Notes  
1000BASE-T 2ch board kit  
Fibre Channel controller  
*1  
*1  
N8804-007  
N8803-035  
X
X
X
X
X
X
X
X
*1: Be sure to install a pair of controller on the same slot# of both of CPU/IO modules  
1st Edition August 10  
Page 16  
 
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
UPS  
[Note]  
- Be sure to manage the UPS via network with Network shutdown software. The UPS can  
not be managed via serial port and USB port with Power Chute Plus software.  
Configuration  
Non-Redundant configuration :  
Power cord  
Power  
socket  
APC UPS (3000 or 5000VA)  
2 connectors  
Network HUB  
Network management Card  
RJ-45  
connector  
APC UPS (1500VA)  
Redundant configuration :  
Network management Card  
Power cord  
Power  
socket  
APC UPS (1500VA)  
2 connectors  
Network HUB  
Network management Card  
RJ-45  
connector  
Product List  
UPS :  
APC Smart-UPS 1500VA RM 2U  
APC Smart-UPS 3000VA RM 3U  
APC Smart-UPS RT 5000VA 208V  
w/ 208V to 120V 2U Step-Down Transformer  
Option :  
980 Watts / 1500 VA  
2700 Watts / 3000 VA  
3500 Watts / 5000 VA, 5U  
Network management Card  
Software :  
PowerChute Network Shutdown  
The card managing the UPS via network, 1X 100BASE-T  
Management software managing the UPS via network  
1st Edition August 10  
 
Page 17  
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
UPS (When using Tower conversion kit)  
[Note]  
- Be sure to manage the UPS via network with Network shutdown software. The UPS can  
not be managed via serial port and USB port with Power Chute Plus software.  
Configuration  
Non-Redundant configuration :  
Power cord  
Power  
socket  
APC UPS (3000VA)  
2 connectors  
Network HUB  
Network management Card  
RJ-45  
connector  
APC UPS (1500VA)  
Redundant configuration :  
Network management Card  
Power cord  
Power  
socket  
APC UPS (1500VA)  
2 connectors  
Network HUB  
Network management Card  
RJ-45  
connector  
Product List  
UPS :  
APC Smart-UPS 3000VA  
APC Smart-UPS 1500VA  
Option :  
2700 Watts / 3000 VA  
980 Watts / 1500 VA  
Network management Card  
Software :  
PowerChute Network Shutdown  
The card managing the UPS via network, 1X 100BASE-T  
Management software managing the UPS via network  
1st Edition August 10  
 
Page 18  
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
Guest OS license  
[Note]  
- Guest Operating Systems supported on NEC Express5800/ft series are the same as other  
general purpose servers.  
VMware vSphere Client  
[Note]  
- For maintenance of VMware ESX on the FT server, a dedicated terminal which satisfies  
the following requirements is needed.  
266MHz or faster x86 processor (Intel, AMD)  
(500MHz recommended)  
CPU  
Memory  
Minimum 200MB  
1GB free disk space for a complete installation, which includes the following  
components:  
- Microsoft .NET 2.0  
- Microsoft .NET 3.0 SP1  
- Microsoft Visual J#  
Disk  
- vSphere Client 4.0  
- vSphere Host Update Utility 4.0  
You must also have 400MB free on the drive that has your %temp% directory.  
If all of the prerequisites are already installed, 300MB of free space is required  
on the drive that has your %temp% directory, and 450MB is required for the  
vSphere Client 4.0.  
Windows Server 2003 SP1 32bit  
Windows Server 2003 SP2 32bit  
Windows Server 2003 R2 32bit  
Windows Server 2003 64bit  
Windows Server 2008 Standard  
Windows Server 2008 Enterprise  
Windows Server 2008 Datacenter  
Windows Server 2008 Standard 64bit  
Windows Server 2008 Enterprise 64bit  
Windows Server 2008 Datacenter 64bit  
Windows XP Professional SP2  
Windows XP Professional SP3  
Windows XP Professional SP2 64bit  
Windows Vista Business  
OS  
Windows Vista Enterprise  
Windows Vista Business 64bit  
Windows Vista Enterprise 64bit  
NIC  
1Gbps recommended  
1st Edition August 10  
Page 19  
 
System Configuration Guide  
NEC Express5800/R320a-E4/M4  
NEC Storage management server  
[Note]  
- Required for NEC Storage Manager for NEC storage management.  
Backup server  
[Note]  
- Dedicated server for data backup is recommended  
NEC ESMPRO Agent  
[Note]  
- R320a VMware model does not include the NEC ESMPRO Agent for VMware.  
Download from ITPF portal site.  
1st Edition August 10  
Page 20  
 
2. Local Procurement  
2.1 Hardware/software components  
The following table shows the status whether the local procurements are allowed according to  
each component. You need to purchase the components provided by NEC, if the status  
indicates NO.  
Components  
Status  
CPU  
No  
No  
Memory  
Hard disk drive  
LAN controller  
No  
No  
KVM switch(USB,PS/2 port)  
Keyboard (USB)  
Mouse (USB)  
No  
No  
Yes  
Yes  
Yes  
Yes  
Server Rack  
UPS  
UPS management software  
2.2 Power cord  
No power cord is attached to the products listed below. You must obtain the cables from local  
suppliers. Note that the cords to be purchased should meet the specifications below.  
And to use the server switch unit, you may have to purchase a local AC adapter or power cord,  
depending on the country you live in. The connector type required for the AC adapter is  
IEC320.  
Product code  
Product name  
Standard Input  
100-120VAC  
220-240VAC  
N8800-149F  
N8800-150F  
N8191-10F  
Express5800/R320a-E4  
12.0A  
12.0A  
0.12A  
6.0A  
6.0A  
0.08A  
Express5800/ R320a-M4  
Server Switch Unit(8Server/USB)  
2-1  
 

MTD Lawn Mower 111 604R000 User Manual
Multi Tech Systems Network Card RF820 User Manual
Nikon Digital Camera 13mm User Manual
Nikon Digital Camera 26335 User Manual
Omega Car Amplifier DMD 519 User Manual
Omnimount Indoor Furnishings OM10020 User Manual
Omnimount TV Video Accessories OESK User Manual
Onkyo Stereo Receiver HT RC430 User Manual
Panasonic Table Top Game KX TGA20 User Manual
Patton electronic Marine Battery 2094 User Manual